You should be logged into Admin mode for this purpose as it sometimes asks you to have admin permission and thus even if you are switched to some other account, you will still require an admin password. Type the password for confirmation.
The screen of LAN connection will appear before you. Click LAN properties and double click the internet protocol version 4. The IP will be entered manually here. You can check the connection status by clicking now. Step2: Select Network adapter which is used to release IP address for their client and then select Next.
Step8: Click on Admin and then Ok. Step9: Click on Install, start and then click on configure. Now you have configured successfully!!!! Total Pageviews. Stay Connected With Us. You can install DHCP during the initial installation of Windows Server , or after the initial installation is completed.
After you have installed the DHCP service and started it, you must create a scope. Microsoft recommends that, each DHCP server in your environment has at least one scope that does not overlap with any other DHCP server scope in your environment. The following sections explain how to troubleshoot some of the issues that you may experience, when you try to install and configure a Windows Server based DHCP server in a workgroup.
This issue can be caused by a network problem, or because the DHCP server is unavailable. When the DHCP server started and other clients can obtain valid addresses, verify that the client has a valid network connection and that all the related client hardware devices including cables and network adapters are working properly.
0コメント