Dynadot Help Need support for your Dynadot domains, websites, or one of our tools? How do I set up my domain with Blogger or Blogspot? To set up your domain with Blogger or Blogspot, please follow these steps: Sign in to your Dynadot account. Select "My Domains" from the left-side menu bar and click "Manage Domains" in the drop-down.
Check the box next to your domain name s and click on the "Bulk Action" button. Repeat the same steps and create 3 additional A records pointing to IP addresses You can verify their current settings here.
Press the "Save DNS" button to save your changes. Next, you will need to configure your settings with Blogger: Sign in to your Blogger account. In the "Advanced Settings" box, type in www. Press the Save button to save your changes.
Still Require Assistance? Check out our resources. If these tests do not work, go to the next step. Roll back the DNS changes you made and run the tests again. If the tests still do not work, then there is a problem with your network settings; contact your ISP or network administrator for assistance.
If you encounter any problems after setting Google Public DNS as your resolver, please run the diagnostic procedure. This reverts your settings to using your ISP's default servers.
If you need to manually specify any addresses, use the procedures above to specify the old IP addresses. Except as otherwise noted, the content of this page is licensed under the Creative Commons Attribution 4.
For details, see the Google Developers Site Policies. Home Guides Support. Overview Get Started. Secure Transports. For example: To change the settings for an Ethernet connection, right-click the Ethernet interface and select Properties.
To change the settings for a wireless connection, right-click the Wi-Fi interface and select Properties. Click OK. Test that your setup is working correctly; see Test your new settings. Repeat the procedure for additional network connections you want to change. If the lock icon in the lower left-hand corner of the window is locked, click the icon to make changes, and when prompted to authenticate, enter your password.
Select the DNS tab. For example: To change the settings for an Ethernet connection, select the Wired tab, then select your network interface in the list. It is usually called eth0. To change the settings for a wireless connection, select the Wireless tab, then select the appropriate wireless network.
If the method is set to something else, do not change it. Click Apply to save the change. If you are prompted for a password or confirmation, type the password or provide confirmation.
Replace the nameserver lines with, or add, the following lines: For IPv4: nameserver 8. Save and exit. Restart any Internet clients you are using. Replace that line with, or add, the following line: For IPv4: prepend domain-name-servers 8. For example: To change the settings for an Ethernet connection, click on the Ethernet section. To change the settings for a wireless connection, click on the Wi-Fi section and select the appropriate network name.
Changing the DNS settings for a mobile data connection established with Instant Tethering isn't possible. For mobile Wi-Fi hotspots that are manually set up, however, you can change the DNS settings using the instructions for a wireless connection.
Expand the Network section for the selected connection. In the Name servers section: For IPv4: Select the Google name servers button or alternatively, select the Custom name servers button and enter 8. Click outside the Network section to apply the settings. Routers Every router uses a different user interface for configuring DNS server settings; we provide only the generic procedure. To change your settings on a router: In your browser, enter the IP address of your router to view the router's administration console.
Most routers are manufactured to use a default address such as When prompted, enter the password to edit network settings. Find the screen in which DNS server settings are specified. If there are IP addresses specified in the fields for the primary and seconday DNS servers, write them down for future reference. Restart your browser.
For such fields enter: Expand the 0 entries to if four hex digits are required.
0コメント